Daikin Altherma EHYHBH05A Series - Leaving Water Temperature Control - Using Leaving Water Temperature Control According to a Schedule; Leaving Water Temperature Control - Using Leaving Water Temperature Control NOT According to a Schedule; External Room Thermostat Control - about External Room Thermostat Control

4 | Operation
User reference guide
25
EHYHBH05AF + EHYHBH/X05+08AF + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355632-1E – 2020.10
4.4.8 Leaving water temperature control - Using leaving water temperature control according to
a schedule
To set leaving water temperature preset values (main)
INFORMATION
Adjusting the leaving water temperature is permanent unless the leaving water
temperature is according to a schedule. In that case the overruling is valid until the
next scheduled action.
1 Go to [7.4.2]: > User settings > Preset values > LWT main.
2 Press or to adjust. Example:
35°C 37°C
To adjust the leaving water temperature (additional)
1 Go to the additional leaving water temperature home page (LWT add).
2 Press or to adjust. Example:
45°C 47°C
INFORMATION
In case of weather dependency, an offset value can be modified.
4.4.9 Leaving water temperature control - Using leaving water temperature control NOT
according to a schedule
To adjust the leaving water temperature (main)
1 Go to the main leaving water temperature home page (LWT main).
2 Press or to adjust. Example:
35°C 37°C
To adjust the leaving water temperature (additional)
1 Go to the additional leaving water temperature home page (LWT add).
2 Press or to adjust. Example:
45°C 47°C
INFORMATION
In case of weather dependency, an offset value can be modified.
4.4.10 External room thermostat control - About external room thermostat control
External room thermostat control means that you control the following:
▪ Room temperature on the external thermostat control
▪ Leaving water temperature on the user interface (Daikin)
To control the leaving water temperature, you can do the following: