Daikin Altherma EHYHBH05A Series - Preset Values and Schedules; Using Preset Values

4 | Operation
User reference guide
38
EHYHBH05AF + EHYHBH/X05+08AF + EHYKOMB33AA
Daikin Altherma hybrid heat pump
4P355632-1E – 2020.10
Note: If you are on a home page and try to use a function that is locked, is
displayed for 1second.
To activate or deactivate button lock
1 Press to go to one of the home pages.
2 Press for more than 5seconds.
To activate or deactivate a function lock
1 Press to go to the menu structure.
2 Press for more than 5seconds.
3 Select a function and press .
4 Select Lock or Unlock, and press .
4.7 Preset values and schedules
4.7.1 Using preset values
About preset values
You can define preset values for multiple controls. Preset values make it easy to
use the same value in many places (schedules and room temperature home page
( and )). If you later want to change the value, you only have to do it in one place.
To define preset values
1 Go to [7.4]: > User settings > Preset values.
2 Select for which control you want to define a preset value. Example: Room
temperature.
3 Select a preset value and press . Example: Comfort (heating).
4 Select a temperature and press .
Possible preset values
Control Preset value Where used
Room
temperature
Comfort ▪ Room temperature schedules
▪ Room temperature home page
( and ) if user profile =
Detailed
Eco
LWT main Comfort Main leaving water temperature
schedules
Eco
Tank
temperature
Storage comfort DHWtank temperature schedule
if DHWtank mode is
▪ Scheduled
▪ Scheduled + reheat
Storage eco
Reheat DHWtank temperature schedule
if DHWtank mode = Scheduled +
reheat
Quiet level Used when quiet mode is set to
On