Databook Modular T - October 2022 - Rev. 00 8
4.1.2. Sectioning
To ensure an easy and quick transportation and installation biggest sizes are provide in more sections.
The following table summarize the number of sections for each size.
For the units provided in more sections, size 05, 06 and 07, there is an easy rule to follow up, to identify the
position of the sections, valid for both right and left version of the unit.
Section 1 always refer at supply air flow while section 2 contains the heat exchanger. In this way for right
version, the section 1 is on the right of section 2, while for left version it is on the left.
For size 06 and 07, that are divided into three sections, the third one is the control section. It will be installed
on the left of section 2 for right version and on the right of the section 2 for left version.
To Next Page
Loading...
