Daikin BRC7M676 - Initial Set Value Check; Receiver Installation

16
[Remedial action]
Check the malfunction code on the remote
controller and contact your local dealer. (Refer to
page 14, 15)
13. HOW TO CHECK THE INITIAL
SET VALUE
Further question regarding to the available
functions, contact your local dealer with your initial
settingvalueconrmedbyusingtheremote
controller with the following steps.
1
Press the INSPECTION button to select
the inspection mode “ ”.
The initial set value
Press the button 2 times to return
to normal operation mode.
For installation
1. SAFETY PRECAUTIONS
Please read these “SAFETY PRECAUTIONS”
carefully before installing air conditioning
equipment and be sure to install it correctly.
Thismanualclassiestheprecautionsinto
WARNINGS and CAUTIONS.
Be sure to follow all the precautions below.
They are all important for ensuring safety.
WARNING ...... Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.
CAUTION ...... Indicates a potentially
hazardous situation which,
if not avoided, may result in
minor or moderate injury.
It may also be used to alert
against unsafe practices.
After the installation is completed, test the air
conditioner and check if the air conditioner operates
properly. Give the user adequate instructions
concerning the use and cleaning of the indoor unit
according to the operation manual. Ask the user to
keep this manual in a handy place for future reference.
WARNING
• Make sure to turn off the power supply
before starting the installation.
• Due to high voltage, do not open control
box lid for ten minutes after the safety
breaker is switched off.
• Do not touch live parts when carrying out
this work.
CAUTION
• Refer also to the installation manual
attached to the indoor unit.
• Conrm that following conditions are
satised prior to installation.
-
Ensure that nothing interrupts the operation of
the wireless remote controller. (Ensure that
there is neither a source of light nor uorescent
lamp near the receiver. Also, ensure that the
receiver is not exposed of direct sunlight.)
- Ensure that the operation indicator lamp and
other indicators are easy to see.
• The wireless remote controller kit is not intended
for use in a potentially explosive atmosphere.
01_EN_4P457494-6L.indd 16 13/03/2019 11:07:46