Daikin Comfora FTXTP-M - To Start;Stop Comfort Airflow Operation; Powerful Operation; To Start;Stop Powerful Operation

5 | Operation
User reference guide
22
FTXTP-M_FTXTP-N
Daikin room air conditioners
4P728152-3 – 2023.03
5.6.1 To start/stop Comfort airflow operation
1 Press to start.
Result: The flap position will change, is displayed on the LCD, and the
airflow rate is set to automatic.
Mode Position of flap…
Cooling/Drying Up
Heating Down
Note: Comfort airflow operation is NOT available in Fan only mode.
2 Press to stop.
Result: The flap will return to the position from before the Comfort airflow mode;
disappears from the LCD.
5.7 Powerful operation
This operation quickly maximizes the cooling/heating effect in any operation mode.
You can get the maximum capacity.
Mode Airflow rate
Cooling/Heating ▪ To maximize the cooling/heating
effect, the capacity of outdoor unit is
increased.
▪ The airflow rate is fixed to the
maximum setting.
▪ The temperature and airflow settings
CANNOT be changed.
Drying ▪ The temperature setting is lowered by
2.5°C.
▪ The airflow rate is slightly increased.
Fan only The airflow rate is fixed to the
maximum setting.
INFORMATION
Powerful operation CANNOT be used together with Econo and Comfort airflow
operation. The last selected function takes priority.
Powerful operation will NOT increase the capacity of the unit if it already operates at
maximum capacity.
5.7.1 To start/stop Powerful operation
1 Press to start.
Result: is displayed on the LCD. Powerful operation runs for 20minutes;
after that, operation returns to the previously set mode.
2 Press to stop.
Result: disappears from the LCD.