English
1-5
FWC02/03/04/05/06/08/10FD
ELECTRICAL WIRING CONNECTION
IMPORTANT: * These values are for information only. They should be checked and selected to comply with local and/or
national codes and/or national codes and regulations. They are also subject to the type of installation and
size of conductors.
** The appropriate voltage range should be checked with label data on the unit.
A main switch or other means for disconnection, having a contact separation in all poles, must be incorporated
in the fixed wiring in accordance with the relevant local and national legislation.
Note:
This is a proposed wiring connection. It may change subject to the chiller unit and must comply with the local and national
code and regulations.
Model Indoor FWC02FD FWC03FD FWC04FD FWC05FD
Voltage Range** Indoor
220V-240V/ ~ /50Hz + !
Power Supply Cable Size* mm
2
Number of Conductors
1.5
5
1.5
5
1.5
5
1.5
5
Recommended Time Delay Fuse* A 1111
Model Indoor FWC06FD FWC08FD FWC10FD
Voltage Range** Indoor
220V-240V/ ~ /50Hz + !
Power Supply Cable Size* mm
2
Number of Conductors
1.5
5
1.5
5
1.5
5
Recommended Time Delay Fuse* A 223
FCU 1 FCU 2 FCU 3
FSC
X2
X1
Chiller
FL FM FH N
!
There must be an all pole
disconnection in the supply mains
with a contact separation of at
least 3mm.
All power line must be from the
same phase.
TH
220-240V/~/50Hz or
208-230V/~/60Hz
TH
220-240V/~/50Hz or
208-230V/~/60Hz
220-240V/~/50Hz or
208-230V/~/60Hz
TH
FSC
FSC
FL FM FH N FL FM FH N
L
N
L
N
L
N
FL Fan Low
FM Fan Medium
FH Fan High
N Neutral
FSC Fan Speed Controller
X1, X2, X3 Relay (220~240V, 10A)
TH Thermostat
X3
1 IM-CCFWD-0915(1)-DAIKIN-EN.ind5 51 IM-CCFWD-0915(1)-DAIKIN-EN.ind5 5 4/13/16 3:33:59 PM4/13/16 3:33:59 PM
To Next Page
Loading...
