Daikin FAA100AUVEB - What to Do Before Operation

English 4
2. WHAT TO DO BEFORE
OPERATION
This operation manual is for the following systems
with standard control. Before initiating operation,
contact your Daikin dealer for the operation that cor-
responds to your system.
A= Pair system or simultaneous operation system
B= Multi system
1= Unit with remote controller
2= Unit without remote controller (when used as simultaneous
operation)
NOTE
• Read the operation manual that came with the
remote controller you are using.
If your installation has a customized control system,
ask your Daikin dealer for the operation that corre-
sponds to your system.
• Heat pump type
This system provides COOLING, HEATING,
AUTOMATIC, PROGRAM DRY, and FAN ONLY
OPERATION modes.
A
1
2
OUTDOOR INDOOR
B
OUTDOOR INDOOR
1
1
• Cooling only type
This system provides COOLING, PROGRAM
DRY, and FAN OPERATION modes.
PRECAUTIONS FOR GROUP CONTROL
SYSTEM OR TWO REMOTE CONTROLLER
CONTROL SYSTEM
This system provides two other control systems
beside individual control (one remote controller con-
trols one indoor unit) system. Confirm the following if
your unit is of the following control system type.
• Group control system
One remote controller controls up to 16 indoor
units.
All indoor units are equally set.
• Two remote controllers control system
Two remote controllers control one indoor unit (In
case of group control system, one group of indoor
units)
NOTE
• Contact your Daikin dealer in case of changing
the combination or setting of group control and
two remote controller control systems.
• Please do not change the combination and set-
tings for the group operation and two remote con-
troller control systems by yourself, but be sure to
ask your dealer.
4PEN465287-1C.book Page 4 Thursday, March 23, 2017 2:47 PM