Daikin FAA100BUV1B User Manual

Installer and user reference guide
Split system air conditioner
FAA71BUV1B
FAA100BUV1B

Daikin FAA100BUV1B Specifications

General

Category	Air Conditioner
Model	FAA100BUV1B
Brand	Daikin
Energy Efficiency Ratio (EER)	10.5
Refrigerant	R32
Power Supply	Single Phase
Operating Voltage	220-240 V
Operating Frequency	50 Hz
Indoor Unit Weight	9.5 kg
Outdoor Unit Weight	31 kg

Summary

General safety precautions

2.1 Installer Safety

Safety instructions and precautions for installation personnel.

2.1.2 Installation Site Requirements

Guidelines for selecting a suitable and safe installation location.

2.1.3 Refrigerant Safety

Crucial safety measures for handling refrigerants.

2.1.4 Electrical Safety

Essential safety practices for electrical wiring and connections.

Specific installer safety instructions

General Installer Safety Rules

Fundamental safety rules and regulations for installers.

Unit Installation Safety Guidelines

Safety precautions to follow during unit installation.

Refrigerant Piping Installation Safety

Safety measures for the correct installation of refrigerant piping.

Electrical Installation Safety Guidelines

Specific safety advice for electrical installation procedures.

User safety instructions

4.1 General User Safety

General safety guidelines and warnings for all users.

4.2 Safe Operation Instructions

Critical instructions and warnings for operating the unit safely.

Before operation

Pre-Operation Checks and Warnings

Energy saving and optimum operation

Maintenance and service

10.1 Maintenance Safety Precautions

Safety warnings and general advice before performing maintenance.

10.5 Refrigerant Information

Troubleshooting

11.1 Non-Malfunction Symptoms

Unit installation

16.1 Installation Site Preparation

Guidance on selecting and preparing the installation location.

16.3 Indoor Unit Mounting

Steps for securely mounting the indoor unit.

Piping installation

17.1 Refrigerant Piping Preparation

17.2 Connecting Refrigerant Piping

17.2.5 Pipe Flaring Procedure

Electrical installation

18.1 Electrical Wiring Connection

18.1.2 Electrical Wiring Guidelines

18.2 Indoor Unit Wiring

Finishing the indoor unit installation

19.1 Securing Unit to Mounting Plate

Commissioning

20.3 Pre-Commissioning Checklist

20.4 Test Run Procedure

Configuration

21.1 Field Setting Adjustments

Hand-over to the user

Troubleshooting

23.1 Error Code Troubleshooting

Guide to diagnosing and solving problems using error codes.