Disassembly and Maintenance ESIE05-04
5ā126 Part 5 ā Disassembly and Maintenance
1.16.4 Removal of PC Board
Warning Be sure to wait 10 minutes or more after turning off all power supplies before disassembling work.
Procedure:
Step
Procedure Points
Q Remove the outer panels
according to the procedure
for "Removal of Electrical
Parts Box".
1 Disconnect the front side
wiring connector
connected to the PC
board.
2 Disconnect the PC board
from the tabs by pushing
it inward. Draw the PC
board out partly and
disconnect the remaining
connectors.
The tape holding the electrical
parts box and PC board is for
transport, and is unnecessary
when reinstalling.
3 Completely remove the
PC board.
To Next Page
Loading...
