Daikin FDA125A5VEB - Page 74

20 | Configuration
Installer and user reference guide
74
FDA125A5VEB
Split system air conditioners
4P495031-1B – 2022.10
M C1/SW C2/— External static pressure
(1)
13(23) 6 01 40
02 50
03 60
04 70
05 80
06 90
07 100
08 110
09 120
10 130
11 140
12 150
13 160
14 180
15 200
Time to clean air filter
This setting must correspond with the air contamination in the room. It determines
the interval at which the TIME TO CLEAN AIR FILTER notification is displayed on
the user interface. When using a wireless user interface, you must also set the
address (see the installation manual of the user interface).
If you want an interval of…
(air contamination)
ThenFN
M C1/SW C2/—
±2500h (light) 10(20) 0 01
±1250h (heavy) 02
No notification 3 02
▪ 2 user interfaces: When using 2 user interfaces, one must be set to "MAIN" and
the other to "SUB".
(1)
Field settings are defined as follows:
• M: Mode number – First number: for group of units – Number between brackets: for individual unit
• SW: Setting number / C1: First code number
• —: Value number / C2: Second code number
• : Default