Daikin FLKS25BAVMB - Outdoor Unit - RK(X)S25;35 G2 V1 B9; Removal of Outer Panels; Fan Motor

Outdoor Unit - RK(X)S25/35G2V1B9 SiENBE05-722_A
178 Removal Procedure
4. Outdoor Unit - RK(X)S25/35G2V1B9
4.1 Removal of Outer Panels / Fan Motor
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure Points
1. Appearance features
 Take care not to cut your
finger by the fins of the
outdoor heat exchanger.
2. Remove the panels.
 The stop valve cover is
united with the shield plate.
 When reassembling, make
sure to fit the 5 hooks.
1
Remove the screw of
the stop valve cover.
Pull down the stop
valve cover and remove
it.
DAIKIN
INVERTER
(R7186)
(R118
Stop
valve
cover
(R7188)
Shield plate
Hooks
(R7189)
SiENBE05-722_A.pdf 187 24/02/2011 14:06:13