Daikin FLKS25BAVMB - Field Settings; When 2 Units Are Installed in 1 Room

SiENBE05-722_A Field Settings
Trial Operation and Field Settings 209
2. Field Settings
2.1 When 2 Units are Installed in 1 Room
When 2 indoor units are installed in 1 room, 1 of the 2 pairs of indoor unit and infrared remote
control can be set for different address.
Both the indoor unit PCB and the infrared remote control need alteration.
Indoor Unit PCB  Cut the address setting jumper JA on the control PCB.
Infrared Remote
Control
 Cut the address setting jumper J4.
ADDRESS JA
EXIST 1
CUT 2
(R12419)
Address
J4
EXIST
CUT
1
2
J4
(R6573)
SiENBE05-722_A.pdf 218 24/02/2011 14:06:18