Daikin FLKS25BAVMB - Page 192

SiENBE05-722_A Outdoor Unit - RK(X)S25/35G2V1B9
Removal Procedure 181
3. Remove the fan motor.  The screw has reverse
winding.
 Nut size: M6
1
Remove the washer-
fitted nut of the outdoor
fan.
2
Remove the outdoor
fan.
 When reassembling, align
mark of the outdoor fan
with D-cut section of the
motor shaft.
3
Release the outdoor
temperature thermistor.
Step
Procedure Points
(R11827)
Outdoor fan
10 mm
(R12236)
(R11828)
D-cut
(R11829)
Outdoor temperature
thermistor
SiENBE05-722_A.pdf 190 24/02/2011 14:06:13