Daikin FT35DVM - R50 Dsg; Removal of Panels

Si01-501 R50DSG
Removal Procedure 205
4. R50DSG
4.1 Removal of Panels
Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step Procedure Points
1
To dismount the top
panel, remove the
four mounting
screws (A).
2
To dismount the front
panel, remove the six
mounting screws (B).
3
To dismount the service
cover, remove the two
mounting screws.
4
To dismount the side
panel, remove the six
mounting screws (C).