Daikin FTE25LV1 - Horizontal Blades; Vertical Blade ASSYS; Remove the horizontal blades; Remove the vertical blade ASSYS

Horizontal Blades / Vertical Blade ASSYs Si041265EC
4 Removal Procedure
3. Horizontal Blades / Vertical Blade ASSYs
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Remove the horizontal
blades.
1 Open the horizontal
blades.
2 Unfasten the center and
left shafts while bending
the horizontal blade
(small) slightly.

When reassembling, mount
the large horizontal blade to
the upper position and the
small horizontal blade to the
lower position.
3
4
Unfasten the right shaft
and remove the
horizontal blade (small).
Remove the horizontal
blade (large) in the
same way.

Installation procedure
1. Fit the horizontal blade to the
right shaft first. Make sure to
rotate the horizontal blade so
the shaft fits correctly.
2. Fit the horizontal blade to the
center and left shafts.
2. Remove the vertical blade
ASSYs.

Each vertical blade ASSY
has 5 fins, which can not be
replaced individually.

The vertical blade ASSY is
not marked for difference
between right and left.
1
2
3
Unfasten the 4 hooks.
Remove the vertical
blade ASSY.
Remove the other
vertical blade ASSY in
the same way.
(R2522)
(R18761)
Horizontal blade (large)
Horizontal blade
(small)
(R23377)
Right shaft
Hook
(R23378)