Need help?Do you have a question about the Daikin FTEL60NRV16 and is the answer not in the manual?
Steps to remove air filters, unfasten hooks, and remove optional filters.
Procedure to detach the front panel by releasing and pushing its shafts.
Steps to remove the horizontal blade by releasing its center and left shafts.
Procedure to unfasten hooks and remove vertical blade assemblies.
Procedure to remove the front grille by unscrewing screws and unfastening hooks.
Steps to remove service cover, terminal board screws, connecting wire, and wire fixture.
Procedure to remove ground wire, thermistor, connectors, and the main electrical box.
Steps to remove the control PCB by releasing wires and disconnecting connectors.
Procedure to remove the display/signal receiver PCB and the swing motor.
Steps to pull drain hose, unscrew piping, remove screws, detach unit, and bend piping.
Procedure to remove screws, unfasten hooks, and lift out the indoor heat exchanger.
Steps to remove the right side plate and the fan rotor screw.
Procedure to unfasten hook, remove bottom frame, release fan rotor, and remove fan motor.
General| Brand | Daikin |
|---|---|
| Model | FTEL60NRV16 |
| Category | Air Conditioner |
| Language | English |
To Next Page
