Need help?Do you have a question about the Daikin FTE25LV1 and is the answer not in the manual?
Steps to remove the air filters from the unit.
Procedure for detaching the front panel.
Procedure for detaching the front grille.
Steps for removing horizontal louvers.
Procedure for detaching vertical louvers.
Steps to detach the main electrical enclosure and connecting wires.
Steps for removing the shield plate and printed circuit boards.
Procedure for detaching the swing motor.
Steps to detach the heat exchanger from the installation plate.
Procedure for disconnecting the drain hose and refrigerant piping.
Steps for detaching the main indoor unit body.
Steps for detaching auxiliary piping and side panels.
Final steps to remove the indoor heat exchanger.
Steps to detach the right side panel of the unit.
Procedure for detaching the fan motor and rotor assembly.
Steps to detach the left side panel and bearing.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Dimensions (Indoor Unit) | 770 x 285 x 223 mm |
| Indoor Unit Dimensions (WxHxD) | 770 x 285 x 223 mm |
| Type | Split |
To Next Page
