Daikin FTE25LV1 - Remove the PCBs

Electrical Box / PCBs / Swing Motor Si041265EC
6 Removal Procedure
2. Remove the PCBs.
1 Remove the shield
plate.
2 Unfasten the 2 hooks.
3 Slide the electrical box
cover to the left and
remove the electrical
box cover.
4 Unfasten the 4 hooks
on the back of the
signal receiver PCB.
Step Procedure Points
Shield plate
(R18507)
Hook
Hook
(R21157)
Push
here
(R18509)
Electrical
box cover
Hook
Signal receiver
PCB
(R18502)