Daikin FTK15JEVM User Manual

Service Check Function SiBE121123_A
143 Service Diagnosis
Check Method 2
1. Press the 3 buttons (TEMP, TEMP, MODE) at the same time to enter the diagnosis
mode.
The left-side number blinks.
2. Press the [TEMP]  or  button and change the number until you hear the two consecutive
beeps or the long beep.
3. Diagnose by the sound.

beep : The left-side number does not correspond with the error code.

two consecutive beeps : The left-side number corresponds with the error code but the
right-side number does not.

long beep : Both the left-side and right-side numbers correspond with the error code.
(The numbers indicated when you hear the long beep are the error code.
→
Refer to page 155, 156.)
4. Press the [MODE] button.
The right-side number blinks.
(R8381)
(R8382)
(R8383)
(R8384)
(R8385)

Daikin FTK15JEVM Specifications

General

Brand	Daikin
Model	FTK15JEVM
Category	Heat Pump
Language	English