OPERATION OPERATION
COOL/DRY/FAN Operation
The air conditioner operates in the user selected operation mode.
To start operation
Press and select an operation mode.
• Each pressing of the button changes the mode setting in sequence.
DRY COOL FAN
Press .
• “ ” appears on the LCD.
• COOL/DRY/FAN operation
The OPERATION lamp lights green.
• Operation mode can be changed while
operating by pressing your desired
operation mode button.
Display
To stop operation
Press again.
• Then OPERATION lamp goes off.
To change the temperature setting
Press .
• The displayed items on the LCD will change whenever either one of
the buttons is pressed.
COOL operation DRY or FAN operation
16.0-32.0°C
The temperature setting is not
available.
Press
to raise the temperature and
press to lower the temperature.
Each pressing of the button changes the
temperature by 0.5°C.
NOTE
MODE Notes on each operation mode
COOL
•
This air conditioner cools the room by releasing the heat in the room outside.
Therefore the cooling performance of the air conditioner may be decrease if the outdoor temperature is high.
DRY
•
The computer chip works to rid the room of humidity while maintaining the temperature as much as possible.
It automatically controls temperature and airow rate, so manual adjustment of these functions is unavailable.
FAN • This mode is valid for fan only.
10
01_EN_3P658678-11W.indd 10 03-Feb-23 4:44:54 PM
To Next Page
Loading...
