Daikin FTKF25XVMV - Names of Parts

READ BEFORE OPERATION READ BEFORE OPERATION
Names of Parts
 Indoor Unit
Signal receiver:
• It receives signals from the
remote controller.
• When the unit receives a signal,
you will hear a beep sound.
• Operation start ........beep-beep
• Settings changed ....beep
• Operation stop ........beeeeep
OPERATION lamp (green)
TIMER lamp (orange):
Page 20, 21
STREAMER lamp (blue):
Page 18
Indoor Unit ON/OFF switch:
• Push this switch once to start operation.
Push once again to stop it.
• For the operation mode setting, refer to the following table.
Mode Temperature setting Airow rate
COOL 22.0°C AUTO
• This switch can be used when the remote controller is
missing or out of batteries.
Display
Flap (Horizontal blade):
Page 12
Front panel
Air inlet
Air lter
Model name
Air outlet
Air quality lter
(enzyme blue with
PM2.5)
Louvres (Vertical blades):
• The louvres are inside of the air outlet.
Page 12
5
Tiếng Việt English
Room temperature sensor
• It senses the air temperature
around the unit.
01_EN_3P658678-11W.indd 5 03-Feb-23 4:44:43 PM