SiENBE12-713 Instruction
System Configuration 187
Preparation Before Operation
NOTE
"
To set the clock
1. Press “CLOCK button”.
0:00
is displayed.
MON
blinks.
2. Press “SELECT button” to set the current
day of the week.
3. Press “CLOCK button”.
blinks.
4. Press “SELECT button” to set the clock
to the present time.
Holding down “ ” or “ ” button rapidly
increases or decreases the time display.
5. Press “CLOCK button”.
Always point the remote control at the indoor
unit when pushing the buttons when setting
the indoor unit’s internal clock.
:
blinks.
• If the indoor unit’s internal clock is not set to the correct time, the WEEKLY TIMER will not operate punctually.
1, 3, 5
2, 4
To Next Page
Loading...