Instruction SiENBE12-713
198 System Configuration
2.2.10 WEEKLY TIMER Operation
Up to 4 timer settings can be saved each day of the week.
"
To use WEEKLY TIMER operation
• Make sure the day of the week and time are set.
If not, set the day of the week and time. (page 8.)
• The following procedure is to make a reservation
on Monday for Tuesday 6:00 am/27°C.
1. Press “ button”.
• The day of the week and the reservation number
will be displayed.
• 1 to 4 settings can be made per day.
2. Press “SELECT button” to select the
desired day of the week and reservation
number.
• Pressing the “SELECT button” changes the
reservation number and the day of the week.
3. Press “NEXT button”.
• The day of the week will be set.
• “ ” and “
ON
” blink.
4. Press “SELECT button” to select the desired mode.
• “ ” and “ON” or “OFF” will flash.
• To go to the next reservation setting, select “no setting”.
5. Press “NEXT button”.
• The weekly mode will be set.
• “ ” .and “
6:00
” blink.
6. Press “SELECT button” to select the desired time.
• The time can be set between 0:00 and 23:50 in 10 minute intervals.
• Press “BACK button” to return to the mode setting..
3, 5
1
2, 4, 6
ON TIMER OFF TIMER no setting
To Next Page
Loading...
