SiENBE12-713 Instruction
System Configuration 199
"
To use WEEKLY TIMER operation
7. Press “NEXT button”.
• The time will be set.
• “ ” and the temperature blink.
8. Press “SELECT button” to select the
desired temperature.
• The temperature can be set between 10°C and
32°C.
• To return to the time setting, press “BACK
button”
• The set temperature is only displayed when the
mode setting is on.
9. Press “NEXT button”.
• The temperature will be set.
• The temperature will be set and go to the next
reservation setting
• Set the following using the same procedures.
10.Press “ button” to complete the setting.
• Point the remote control toward the air conditioner and press the buttons to operate. The air
conditioner will beep and the operation lamp will flash.
7, 9
10
8
To Next Page
Loading...
