Daikin FTKV50NRV16 - Remove Display;Signal Receiver PCB; Remove Swing Motor

Si041257EC PCBs / Swing Motor
Removal Procedure 9
2. Remove the display/
signal receiver PCB.
1 Unfasten the 2 hooks
and remove the display/
signal receiver PCB
ASSY.
2
3
4
Unfasten the 3 hooks.
Disconnect the
connector for the
control PCB ([CN_MB]
or [S27]).
Remove the display/
signal receiver PCB.
3. Remove the swing motor.
1 Remove the screw, and
then the swing motor.
Step Procedure Points
(R23397)
Display/signal
receiver PCB
ASSY
Hook
Hook
(R23398)
Connector for
control PCB
Display/signal receiver PCB
(R19794)
(R19795)
Swing motor