Daikin FTKV50NRV16 - Air Filters, Front Panel, and Blades Removal; Remove Air Filters; Remove Front Panel

Air Filters / Front Panel / Horizontal Blade / Vertical Blade ASSYs Si041257EC
2 Removal Procedure
1. Air Filters / Front Panel / Horizontal Blade / Vertical
Blade ASSYs
Warning

Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step Procedure Points
1. Remove the air filters.

The 2 filters are
interchangeable.

Insert the air filter with the
"FRONT" mark faced up.

When reassembling, insert
the air filter along the guides.

Be sure to insert the 2 hooks
when reassembling the air
filter.
1
2
Open the front panel to
the position where it
stops.
Unfasten the 2 hooks
and remove the air
filter.
3 Remove the optional
filter from the back of
the air filter, if any.
2. Remove the front panel.
1 Open the front panel
over the position where
it stops.
2 Push the left shaft to
the right and release
the left shaft.

When reassembling the front
panel, fit the right and left
shafts one by one into the
grooves and fully push them
into position.
(R19771)
Air filter
Front panel
Hook
Air filter
Optional filter
Hook
(R23395)
(R19772)
(R19773)