Daikin FTKV50NRV16 - Remove Bottom Frame Assy and Fan Motor

Si041257EC Fan Motor / Fan Rotor
Removal Procedure 13
3 Unfasten the hook and
remove the bottom
frame ASSY.

When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
4 Release the fan rotor
from the left groove.
(1) Insert the fan motor allowing
for approx. 5 mm (0.2 inch)
of play.
(2) Tighten the fan rotor screw
until it stops. Then give the
screw one more turn.
(3) If the fan rotor rotates
appropriately, tighten the
screw completely.
(4) If not, repeat the procedure
from (1).
5 Remove the fan motor.
Step Procedure Points
Bottom frame ASSY
Hook
(R20350)
5 mm (0.2 inch)
Side face of rotor
(R18879)
Side face of
bottom frame
(R19333)
(R9582)
(R19334)
Fan motor
(R20351)