EasyManua.ls Logo

Daikin FTXF20A2V1B - 4 About the Unit; System Layout; Operation Range

Daikin FTXF20A2V1B
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 | About the unit
Installer reference guide
18
FTXP50~71M2V1B + FTXF20~71A2V1B + ATXF50~71A2V1B
Daikin room air conditioner
4P513661-8H – 2019.12
4 About the unit
WARNING: FLAMMABLE MATERIAL
The refrigerant inside this unit is mildly flammable.
4.1 System layout
NOTICE
Design of the system must not be done at temperatures below –15°C.
a
f
c
e
d
b
a Indoor unit
b Service lid
c Air filter
d Titanium apatite deodorizing and silver particle filter (only for FTXP)
e Refrigerant piping, drain hose and interconnection cable
f Insulation tape
4.2 Operation range
Use the system in the following temperature and humidity ranges for safe and
effective operation.
Operation mode Operation range
Cooling
(a)(b)
Outdoor temperature: –10~46°C DB
Indoor temperature: 18~32°C DB
Indoor humidity: ≤80%
Heating
(a)
Outdoor temperature: –15~24°C DB
Indoor temperature: 10~30°C DB
Drying
(a)
Outdoor temperature: –10~46°C DB
Indoor temperature: 18~32°C DB
Indoor humidity: ≤80%
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation
range.

Table of Contents

Other manuals for Daikin FTXF20A2V1B

Related product manuals