Daikin FTXR28EV1B9 User Manual

13 ■English
COMFORT SLEEP Operation
Controlling the room temperature supports comfort sleep and pleasant wake-up.
•
Check that the clock is correct. If not, set the clock to the present time. (page 6.)
•
The present time display disappears when the COMFORT SLEEP operation is set.
1. Press “ ” during operation.
2. Press “ ” to set the time to wake up.
3. Press “ ”.
•
When settings are made while the unit is not running, press “ ” to start the operation.
■ To cancel the comfort sleep operation
4. Press “ ”.
ATTENTION
NOTE
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating) effect in any oper-
ation mode.
1. Press “ ” during operation.
•
POWERFUL operation ends in 20 minutes.
■ To change the airflow direction
(page 10.)
•
Temperature, humidity and airflow rate cannot be changed.
■ To cancel POWERFUL operation
2. Press “ ” again.
•
The operation mode goes back to the previous one. The multi-colored indicator
on the unit also goes back to the previous color.
NOTE
•
Make the room temperature comfortable to some extent before sleep.
<Recommended set temperature> COOLING .................. 26°C – 29°C
HEATING ................... 20°C – 25°C
* Too low set temperature may cause you to get chilled while asleep.
■
Note on COMFORT SLEEP operation
•
Can be used for COOLING, DRY COOLING, MOISTURE COOLING, HEATING,
HUMID HEATING and MOISTURE HEATING.
•
Cannot be used with TIMER operation.
■
How to use COMFORT SLEEP operation effectively
•
Starting COMFORT SLEEP operation low-
ers the set temperature by 2°C in 3 hours
and starts raising it by 1°C 1 hour before the
set time, offering V-curve temperature con-
trol. (See the right figure.)
•
Set the airflow direction so that the air from the unit
does not directly blow on the occupants of the room.
■
Note on POWERFUL operation
•
Can be used for COOLING, DRY COOLING, HEATING, HUMID HEATING and
MOISTURE HEATING. (Cannot be used while the unit is not running.)
Pressing “ ” during COOLING, DRY COOLING or MOISTURE COOLING
changes the operation mode to POWERFUL COOLING.
Pressing “ ” during HEATING, HUMID HEATING or MOISTURE HEATING
changes the operation mode to POWERFUL HEATING.
•
The operation noise is slightly louder during POWERFUL operation.
<
COMFORT SLEEP
>
1, 3
2
4
1, 2
<
POWERFUL
>
blinks.
is displayed.
• Pressing the button changes the
time in 10 minutes. Holding the
button makes the time change faster.
is displayed.
is displayed.
0 Sleeping time
(For 6 hours of sleep)
Set
temper-
ature
2hours
2hours
2hours
1
ON
ON
23456
–1˚C
ON
–2˚C
Set wakeup time
Set wakeup time
Wakeup
Wakeup
Set wakeup time
Wakeup
1hour
1hour
1hour3hours
3hours
3hours
Green
Red
01_EN_3P190650-1D.fm Page 13 Tuesday, March 6, 2007 6:26 PM

Daikin FTXR28EV1B9 Specifications

General

Brand	Daikin
Model	FTXR28EV1B9
Category	Air Conditioner
Language	English