15
Cleaning
Cleaning the remote controller
z
Wipe it clean with soft, dry cloth.
Do not use any water hotter than 40˚C (104˚F), or v olatile liquids such as benzine, gasoline and
thinner, polishing powder, or anything hard such as a scrub brush.
When the unit is not used for a long time
1 On a sunny day, keep the system running for
half a day in the FAN mode to dry it up inside.
3
12
FAN mode
1
Press
to select the cooling
mode.
2
Press
to adjust the set
temperature to 32˚C (90˚F).
3
Press .
zThe airflow rate remains the same, and is not
adjustable.
zRun the system when the room temperature
is below 28˚C (82˚F).
2 Finally turn off the circuit breaker dedicated for
the room air conditioner.
3 Clean the air filter and place it back into
position.
To Next Page
Loading...
