Daikin FTXS09DVJU - Page 230

SiUS04-702 FTXS15/18/24DVJU
Removal Procedure 219
9
Press the receiver units
down and release the
hooks on the upper
side, and then undo the
hooks on the lower
side.

Release the hooks on the
upper side.
10
Cut the clamp.
11
The receiver units
contain four PCBs.
Remove each PCB with
releasing hooks.
Disconnect every
connector from each
PCB.

Remove the receiver units
while pushing the hooks of
connectors.
Step
Procedure Points