Daikin FTXS09DVJU - Page 231

FTXS15/18/24DVJU SiUS04-702
220 Removal Procedure
12
Cut the clamp.

Clamps should be always
available.
Fix it as it was before.
5. Remove the control PCB.
1
Undo the 2 hooks on
the lower side, and then
the 2 hooks on the
upper side.
Remove the control
PCB.
2
Control PCB (indoor
unit)
S1: connector for the
fan motor
S21: HA
S26: connector for the
room temperature
thermistor
S32: connector for the
heat exchanger
thermistor
Step
Procedure Points