Daikin FTXS20K2V1B - Front Panel; Model Name; Operation Lamp; Signal Receiver

Display
5
Name of Parts
Indoor Unit
Air inlet
Front panel
Air outlet
Louvers (vertical blades)
• Thelouversareinsideoftheairoutlet.
Page13
INTELLIGENT EYE
sensor
• Itdetectsthemovementsof
peopleandautomatically
switchesbetweennormal
operationandenergysaving
operation.
Page16
Flap (horizontal blade)
Page13
INTELLIGENT EYE lamp
(green)
Page16
Signal receiver
• Itreceivessignalsfromtheremote
controller.
• Whentheunitreceivesasignal,youwill
hearabeepsound.
Case Soundtype
Operationstart beep-beep
Settingchanged beep
Operationstop longbeep
Indoor unit ON/OFF switch
• Pressthisswitchoncetostartoperation.
Pressonceagaintostopit.
• Theoperationmodereferstothefollowingtable.
Mode Temperaturesetting Airowrate
AUTO 25°C AUTO
• Thisswitchisusefulwhentheremotecontrollerismissing.
Model name
plate
Room temperature
sensor
• Itdetectstheairtemperature
aroundtheunit.
TIMER lamp (yellow)
Page21
OPERATION lamp
(green)
01_EN_3P297033-1.indd 5 10/12/2011 2:15:01 PM