Main Functions SiBE041134EB
28 Functions and Control
1.12 Clock Setting
ARC466 Series The clock can be set by taking the following steps:
1. Press the Clock button.
→ is displayed and MON and blink.
2. Press the Select
or Select
button to set the clock to the current day of the week.
3. Press the Clock button.
→ blinks.
4. Press the Select
or Select
button to adjust the clock to the present time.
Holding down the Select
or Select
button increases or decreases the time display
rapidly.
5. Press the Clock button to set the clock. (Point the remote controller at the indoor unit when
pressing the button.)
→ blinks and clock setting is completed.
(R19926)
0:00
Select
button
Clock
button
To Next Page
Loading...
