POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating) effect in any
operation mode. You can get the maximum capacity.
To start POWERFUL operation
Press during operation.
POWERFUL operation ends in 20 minutes. Then the system automatically operates again with •
the previous settings which were used before POWERFUL operation.
“ •
” is displayed on the LCD.
When using POWERFUL operation, there are some functions which are not available.•
To cancel POWERFUL operation
Press again.
“ • ” is no longer displayed on the LCD.
NOTE
Notes on POWERFUL operation
POWERFUL operation cannot be used together with ECONO, COMFORT AIRFLOW or QUIET operation.•
POWERFUL operation will not increase the capacity of the air conditioner if the air conditioner is already in operation with its maximum capacity •
demonstrated.
In COOL, HEAT and AUTO operation•
To maximize the cooling (heating) effect, the capacity of outdoor unit is increased and the airfl ow rate is fi xed to the maximum setting.
The temperature and airfl ow settings are not variable.
In DRY operation•
The temperature setting is lowered by 4.5°F (2.5°C) and the airfl ow rate is slightly increased.
In FAN operation•
The airfl ow rate is fi xed to the maximum setting.
01_EN_3P228444-4J.indd 1701_EN_3P228444-4J.indd 17 10/12/2011 9:34:37 AM10/12/2011 9:34:37 AM
To Next Page
Loading...
