6
Names of Parts
Remote Controller: ARC452A21
Signal transmitter
To use the remote controller, aim the •
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
Do not drop the remote controller. Do •
not get it wet.
The maximum distance for •
communication is approximately
23ft (7m).
FAN setting button
Selects the airfl ow rate setting.•
Page 11
POWERFUL button
POWERFUL operation •
Page 17
Display (LCD)
It displays the current settings.•
(In this illustration, each section is
shown with its displays on for the
purpose of explanation.)
TEMPERATURE
adjustment buttons
Changes the temperature setting.•
Page 10
ON/OFF button
Press this button once to start •
operation.
Press once again to stop it.
Page 10
Front cover
Open the front cover. •
Page 7
01_EN_3P228444-4J.indd 601_EN_3P228444-4J.indd 6 10/12/2011 9:34:21 AM10/12/2011 9:34:21 AM
To Next Page
Loading...
