4
Names of Parts
Indoor Unit
Panel tab
INTELLIGENT EYE
sensor
It detects the movements of •
people and automatically
switches between normal
operation and energy saving
operation.
Page 15
Room temperature
sensor
It detects the air temperature •
around the unit.
OPERATION lamp (green)
TIMER lamp (yellow)
Page 20
INTELLIGENT EYE lamp
(green)
Page 15
Signal receiver
It receives signals from the remote •
controller.
When the unit receives a signal, •
you will hear a beep sound.
Operation start• ......... beep-beep
Settings changed• ..... beep
Operation stop• ......... long beep
Display
Indoor unit ON/OFF switch
Push this switch once to start operation.•
Push once again to stop it.
The operation mode refer to the following table.•
Model Mode Temperature setting Airfl ow rate
COOLING ONLY COOL 72°F (22°C) AUTO
HEAT PUMP AUTO 77°F (25°C) AUTO
This switch is useful when the remote controller is missing.•
Air inletFront panel
Model name
plate
Air outlet
Fins (vertical blades)
The fi ns are inside of the air •
outlet.
Page 12
Louvers (horizontal blades)
Page 12
01_EN_3P228444-4J.indd 401_EN_3P228444-4J.indd 4 10/12/2011 9:34:18 AM10/12/2011 9:34:18 AM
To Next Page
Loading...
