Air fi lter
Wash the air fi lters with water
or clean them with vacuum
cleaner.
If the dust does not come off easily, wash them with •
neutral detergent thinned with lukewarm water, then
dry them up in the shade.
It is recommended to clean the air fi lters every •
2 weeks.
Titanium apatite photocatalytic air-purifying fi lter
The titanium apatite photocatalytic air-purifying fi lter can be
renewed by washing it with water once every 6 months.
We recommend replacing it once every 3 years.
[ Maintenance ]
Vacuum dusts, and soak in 1.
warm water or water for
about 10 to 15 minutes if dirt
is heavy.
Do not remove the fi lter from frame when washing with •
water.
After washing, shake off 2.
remaining water and dry in
the shade.
Since the material is made out of polyester, do not •
wring out the fi lter when removing water from it.
[ Replacement ]
Remove the tabs on the fi lter 1.
frame and replace with a new
fi lter.
Dispose of the old fi lter as non-fl ammable waste.•
01_EN_3P228444-4J.indd 3101_EN_3P228444-4J.indd 31 10/12/2011 9:35:07 AM10/12/2011 9:35:07 AM
To Next Page
Loading...
