What to do if a switch or a button often fails to work properly on Daikin Air conditioning?
If a switch or button often fails to work properly, turn the breaker OFF and call the service shop.
What to do if the safety breaker, a fuse, or the earth leakage breaker cuts off the operation frequently for Daikin Air conditioning?
If the safety breaker, a fuse, or the earth leakage breaker cuts off the operation frequently, turn the breaker OFF and call the service shop.
What to do if the power cord of Daikin Air conditioning is abnormally hot or damaged?
If the power cord is abnormally hot or damaged, turn the breaker OFF and call the service shop.
What to do if my Daikin Air conditioning does not operate and the OPERATION lamp is off?
If your Daikin air conditioner isn't operating and the OPERATION lamp is off, check the following: Has a breaker turned OFF or a fuse blown? Is there a power failure? Are batteries properly set in the remote controller? Is the timer setting correct?
Why does hot air not flow out soon after starting the heating operation on my Daikin FTXS60BVMA Air Conditioner?
If hot air doesn't flow out immediately after starting the heating operation on your Daikin Air Conditioner, it's because the air conditioner is warming up. You should wait for 1 to 4 minutes. The system is designed to discharge air only after it reaches a certain temperature.
How to stop the bad odor from my Daikin Air conditioning indoor unit?
If the indoor unit gives out an odor, it is recommended to have the indoor unit washed by a technician. Consult the service shop where you bought the air conditioner.
What to do if an abnormality (such as a burning smell) occurs with Daikin Air conditioning?
If an abnormality, such as a burning smell, occurs, turn the breaker OFF and call the service shop.
What to do if there is a burning smell coming from Daikin Air conditioning?
If you notice a burning smell, immediately turn the breaker OFF and call the service shop.
What to do if I hear an abnormal sound during Daikin Air conditioning operation?
If you hear an abnormal sound during operation, turn the breaker OFF and call the service shop.
What to do if my Daikin FTXS60BVMA Air Conditioner stops suddenly and the OPERATION lamp blinks?
If your Daikin Air Conditioner stops suddenly and the OPERATION lamp is blinking, clean the air filters or remove any obstructions. Then, turn the breaker OFF, turn it ON again, and try operating the air conditioner with the remote controller.
General| Cooling Capacity | 6.0 kW |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Coefficient of Performance (Heating) | 3.7 |
| Indoor Unit Noise Level | 19 dB(A) |
| Outdoor Unit Noise Level | 49 dB(A) |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Weight | 32 kg |
General statements on unit safety, distinguishing between warnings and cautions.
Critical safety warnings regarding fire, explosion, injury, and electrical hazards.
Cautions to prevent electric shocks, property damage, and unit deterioration.
Safety guidelines for outdoor unit, ventilation, handling the unit with wet hands, and cleaning procedures.
Guidelines for selecting an appropriate installation location for the air conditioner.
Advice on choosing an installation spot to avoid disturbing neighbors with noise or vibration.
Information on dedicated power circuits and the need for professional help for relocation.
Identification and illustration of the various parts of the indoor unit.
Illustration and labels for the main control panel of the indoor unit.
Detailed descriptions and functions of indoor unit components, including sensors and switches.
Identification and description of outdoor unit parts such as air inlets, outlets, piping, and drain hose.
Detailed explanation of all buttons, displays, and features on the remote controller.
Specific functions of each button on the remote controller, including mode, temperature, and timer controls.
Step-by-step instructions for inserting and replacing batteries in the remote controller.
Guidelines for operating the remote controller and precautions for maintaining its sensitivity and functionality.
Instructions on how to operate the remote controller and its effective communication range.
Guide for mounting the remote controller holder on a wall for convenient access.
Procedures for setting the unit's clock and turning on the main power breaker.
Recommendations for saving energy and important notes regarding operating conditions.
How to select and start the AUTO, DRY, COOL, HEAT, or FAN operating modes.
Instructions on how to adjust the desired temperature for different operation modes.
Guide on changing the fan speed settings for optimal airflow in various modes.
Important notes and explanations for HEAT, DRY, AUTO operations, and air flow rate adjustments.
How to control the horizontal flap's swing and stop position for desired airflow direction.
Steps to adjust the vertical louvers' swing and stop position for optimal air direction.
Instructions on activating and deactivating the 3-D airflow mode for comprehensive air circulation.
Important considerations and cautions regarding louver and flap angle adjustments.
How to activate and deactivate the POWERFUL operation mode for maximum cooling or heating.
Specifics on how POWERFUL operation affects cooling/heating capacity and air flow rate.
Instructions for enabling the OUTDOOR UNIT SILENT operation to reduce noise levels.
Information on modes where SILENT operation is available and its compatibility with other modes.
Steps to initiate and deactivate the HOME LEAVE operation for personalized settings.
Guide on setting preferred temperature and air flow rates for the HOME LEAVE feature.
Explains how HOME LEAVE operation can be used for energy saving.
Explains how HOME LEAVE operation can be used as a favorite mode.
Instructions for activating and deactivating the INTELLIGENT EYE sensor operation.
Describes how the INTELLIGENT EYE operation changes based on room occupancy.
Details on how INTELLIGENT EYE contributes to energy saving by adjusting settings.
Information on the sensor's detection range, potential false detections, and cautions.
Step-by-step guide to setting the timer for the unit to turn off automatically.
How to cancel an active OFF TIMER and details about the NIGHT SET MODE function.
Instructions for setting the timer to turn the unit on automatically at a specific time.
How to use ON TIMER and OFF TIMER functions simultaneously and important attention points.
Basic cleaning instructions for the indoor, outdoor units, and remote controller using a dry cloth.
Detailed steps for safely removing, cleaning, and reattaching the front grille of the indoor unit.
Instructions for cleaning and replacing the main air filters.
Guidelines for maintaining the photocatalytic deodorizing filter, including washing and replacement.
Key checks to perform before operating the unit, including base, inlets, outlets, and drain hose.
Steps to prepare the unit for extended periods of non-use, including drying and battery removal.
Explains common operational behaviors that may seem like issues but are normal system functions.
Checks for when the air conditioner does not operate, including power, batteries, and timer settings.
Checks for poor cooling/heating effects or sudden stops, focusing on filters, obstructions, and settings.
Lists critical symptoms that require immediate attention from a service technician.
Guidance on system behavior after a power failure, during lightning, and disposal requirements.
To Next Page
