23
■
To use WEEKLY TIMER operation
•
Make sure the day of the week and time are set.
If not, set the day of the week and time. (page 8.)
1. Press “ button”.
•
The day of the week and the reservation
number of the current day will be displayed
.
• 1 to 4 settings can be made per day.
2.
Press the “SELECT button” to select the desired
day of the week and reservation number.
•
Pressing the “SELECT button” changes the
reservation number and the day of the week.
3. Press “NEXT button”.
•
The day of the week and reservation number will be set.
• “ ” and “ ” blink.
4.
Press “SELECT button” to select the desired mode.
• Pressing the “SELECT button” changes
“ ” or “ ” setting in sequence.
• In case the reservation has already been set, selecting “blank” deletes the reservation.
• Go to STEP 9 if “blank” is selected.
5. Press “NEXT button”.
• The ON/OFF TIMER mode will be set.
• “ ” and the time blink.
6. Press “SELECT button” to select the desired time.
• The time can be set between 0:00 and 23:50 in 10 minute intervals.
• To return to the ON/OFF TIMER mode setting, press “BACK button”.
• Go to STEP 9 when setting the OFF TIMER.
7. Press “NEXT button”.
• The time will be set.
• “ ” and the temperature blink.
Setting mode
3, 5, 7
1
2, 4, 6
6:00 8:30 17:30 22:00
25˚C 27˚C
Program 1 Program 2 Program 3 Program 4
ON OFF ON OFF
[Monday]
ON OFF Blank
ON TIMER OFF TIMER blank
Day and number settings
ON/OFF settings Time settings Temperature settings
Setting Displays
01_EN_3P266961-1.fm Page 23 Tuesday, June 8, 2010 2:36 PM
To Next Page
Loading...
