8
Preparation before Operation
■
To set the clock
1. Press “CLOCK button”.
“ ” is displayed.
“ ” and “ ” blink.
2. Press “SELECT button” to set
the current day of the week.
3. Press “CLOCK button”.
“” blinks.
4. Press “SELECT button” to set
the clock to the present time.
Holding down “ ” or “ ” button
rapidly increases or decreases the time
display.
5. Press “CLOCK button”.
Point the remote controller at the indoor
unit when pushing the buttons.
“ ” blinks.
NOTE
• If the indoor unit’s internal clock is not set to the correct time, ON/OFF TIMER and
WEEKLY TIMER will not operate punctually.
1, 3, 5
2, 4
01_EN_3P266961-1.fm Page 8 Tuesday, June 8, 2010 2:36 PM
To Next Page
Loading...
Need help?
General
