Daikin FTYN20CVMB9 - Bell Mouth Removal Procedure

Outdoor Unit / RK(X)S-C, ARK(X)S-C SiENBE04-401A
184 Removal Procedure
3
Remove the sheets of
putty.
Cut the pipe with a tube
cutter.
4
Heat up the brazed part
and withdraw the piping
with pliers.
 Provide a protective sheet or
a steel plate so that the
brazing flame cannot
influence peripheries.
 Be careful so as not to break
the pipes by pressing it
excessively by pliers when
withdrawing it.
Step
Procedure Points
Tube cutter