Outdoor Unit / RK(X)H-C, ARK(X)H-C, R(Y)N-C SiENBE04-401A
202 Removal Procedure
Step Procedure Points
3
Remove the fan motor
assembly.
4
The propeller fan can
be removed when the
washer faced nut (M8)
is removed.
When restoring, match the t
mark of the propeller fan with
the D-cut of the motor shaft.
The fan should be restored
so that the mark z will be at
upper part of the fan motor.
5
Release the lead wire
from the hooks.
(R4050)
Propeller
fan
(R4051)
Mark
(R4052)
To Next Page
Loading...
