14
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling
(heating) effect in any operation mode. You can get the
maximum capacity.
■ To start POWERFUL
operation
1. Press “POWERFUL button”.
•
POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
• When using POWERFUL operation,
there are some functions which are not
available.
• “ ” is displayed on the LCD.
■ To cancel POWERFUL
operation
2. Press “POWERFUL button”
again.
• “ ” disappears from the LCD.
NOTE
■
Notes on POWERFUL operation
• POWERFUL Operation can only be set when the unit is running. Pressing the operation
stop button causes the settings to be canceled, and the “ ” disappears from the LCD.
Priority is given to the function of whichever button is pressed last.
•
In COOL and HEAT mode
To maximize the cooling (heating) effect, the air flow rate is fixed to the maximum setting.
The temperature and air flow settings are not variable.
•
In DRY mode
The air flow rate is slightly increased.
•
In FAN mode
The air flow rate is fixed to the maximum setting.
1, 2
01_EN_3P232468-8.fm Page 14 Wednesday, June 4, 2008 10:33 AM
To Next Page
Loading...
Need help?
General
