Troubleshooting by Remote Controller Si20-701_B
419
Remote Controller Display
U8
Applicable Models
RZQ-K/H, RZQ(S)-B/C, RZQG, RZR-KU/HU
Method of Error Detection
In case of controlling with 2- remote controller, check the
system using micro-computer if signal transmission
between indoor unit and remote controller (main and sub)
is normal.
Error Decision Conditions
The error is generated when, in case of controlling with 2
remote controllers, the micro-processor detects that the
transmission between the indoor unit and the remote
controllers (main and sub) is not normal over a certain
amount of time.
Supposed Causes
îš„ Transmission error between main remote controller
and sub remote controller
îš„ Connection among sub remote controllers
îš„ Defective remote controller PCB
To Next Page
Loading...
Need help?
General
