Daikin FUY71FJV1 User Manual

Si20-701_B Troubleshooting by Remote Controller
54
3. Troubleshooting by Remote
Controller
3.1 Procedure of Self-diagnosis
by Remote Controller
3.1.1 Wired Remote Controller —
BRC1C61/BRC1D61
If operation stops due to error, the remote controller’s
operation LED blinks, and error code is displayed. (Even
if stop operation is carried out, error contents are
displayed when the inspection mode is entered.) The
error code enables you to tell what kind of error caused
operation to stop.
Note:
1. Pressing the INSPECTION/TEST button will blink the
check indication.
2. While in service mode, holding down the ON/OFF
button for a period of 5 seconds or more will clear the
error history indication shown above. In this case, on
the codes display, the error code will blink twice and
then change to “00” (= Normal), the Unit No. will
change to “0”, and the operation mode will
automatically switch from service mode to normal
mode (displaying the set temperature).
Operation LED
ON/OFF button
Error code
Inspection
display
INSPECTION/
TEST button
Display of
indoor unit for
which an error
has been
detected

Daikin FUY71FJV1 Specifications

General

Brand	Daikin
Model	FUY71FJV1
Category	Air Conditioner
Language	English