7
Setting item LED panel LCD panel Setting method
–– –– ––
ON, OFF diSPOFF
Select ON by using
or key, and press
the key to determine
the setting.
ON, OFF P down Select "ON" by using
key and key,
and press the key to
determine the setting.
Current
indication mode
G-SET
operation
Automatic pump
down operation
Dehumidification
ON-A・OFF setting
MODE
M
MODE
M
MODE
M
MODE
M
Note) Refer to the detail of automotic pump down function in the "4.3.1" of Service manual.
CAUTION
1．To apply the humidification control, be sure to set "ON-A".
2．ON/OFF of the reheating coil and DE-HUMID LED lit/unlit are not
synchronous.
3．When the dehumidification ON-A・OFF is set to ON, G-Set
operating mode will be skipped.
OFF, ON-A dHu Select "ON-A" by using
key and key,
and press the key to
determine the setting.
01-12SGLXE10E-A26B,C11.1.1810:37AMページ7
To Next Page
Loading...
