Daikin LXE10E-A26E - 3. G-SET OPERATION;AUTOMATIC PUMP DOWN OPERATION MODE;DEHUMIDIFICATION ON-A • OFF SETTING

6
3. G-SET OPERATION/AUTOMATIC PUMP DOWN OPERATION
MODE/DEHUMIDIFICATION ON-A・OFF SETTING
The energy consunption reducing operation during G-SET operation, automatic pump down operation
collecting refrigerant to the liquid receiver and dehumidification ON-A・OFF setting are executed.
Press the key in current indication mode to go to G-SET operation /
Automatic pump down operation / Dehumidification ON-A･OFF setting.
※ After the automatic pump down is completed, the pump down status is
maintained until the power supply is turned off.
Pressing the key changes the mode between G-SET operation and automatic pump down /
Dehumidification ON-A･OFF setting.
The set point can be set by using key or key.
Note: When the dehumidification ON-A・OFF is set to ON, G-Set operating mode will be skipped.
MODE
M
MODE
M
MODE
M
All indication
light on
(for 3 sec.)
Starting
preparation
(for 18 sec.)
Current
indication
(Operation state)
※
1
G-SET operation /
Automatic pump
down operation /
Dehumidification
ON-A•OFF setting.
MODE
M
01-12SGLXE10E-A26B,C11.1.1810:37AMページ6
https://daikin-p.ru