Need help?Do you have a question about the Daikin Maverick I MPSA010D and is the answer not in the manual?
General| Brand | Daikin |
|---|---|
| Model | Maverick I MPSA010D |
| Category | Air Conditioner |
| Language | English |
Manual's purpose, installation and operation precautions.
Crucial safety warnings for installation, operation, and potential hazards.
Instructions for inspecting unit for damage and verifying components upon delivery.
Detailed description of the unit's primary internal and external components.
General installation guidelines, compliance with codes, and reference to standards.
Guidance on selecting an optimal and safe installation location for the unit.
Specific requirements and best practices for installing the unit outdoors.
Procedure for correctly installing the essential exhaust and air inlet hoods.
Steps for modifying unit configuration, specifically for downflow to horizontal conversion.
Essential minimum clearance requirements for unit performance and service access.
Diagrams and information on unit rigging, shipping board removal, and roof curb installation.
Guidelines for duct system installation and safety precautions for return air.
Explanation of the High Gas Reheat system operation, including sensors and modes.
Details on VFD and OFMC installation, operation, and optimization for reheat performance.
Procedures and safety precautions for connecting the unit's gas supply.
Steps for LP gas conversion and procedures for adjusting furnace input and gas pressure.
Data tables for furnace input ratings and LP gas pipe capacity.
Safety, requirements, and guidelines for unit power supply and branch circuit wiring.
Tables and diagrams for recommended wire sizes, conduit, and base entry locations.
Guidelines for thermostat compatibility, wiring, and specifications for factory and customer options.
Wiring diagrams illustrating connections for customer-supplied and factory-supplied thermostats.
Diagrams for electromechanical controls, covering gas heat, cooling only, and SAF configurations.
Diagrams for DDC controls, covering gas heat, cooling only, SAF, and HGRH configurations.
Tables detailing unit capacities, performance metrics, and physical dimensions.
Electrical data for motors and MCA/MCOP, across different voltages and models.
Information and specifications for auxiliary heater kits and their application.
Diagrams illustrating the overall physical dimensions and access points of the unit.
Diagrams detailing dimensions for duct connections and roof curb installations.
Tables showing airflow performance metrics, including RPM, Watts, and CFM at various static pressures.
Side airflow performance data and correction factors for MPS models, including component air resistance.
Table detailing shipping and operating weights for various optional accessories.
Features and diagrams for non-DDC and DDC economizers for downflow and horizontal applications.
Information on power exhaust kits and motorized/non-motorized fresh air dampers.
Information and diagrams for full perimeter roof curbs used for unit installation.
Details on the furnace's two-stage ignition control and normal operating sequences.
General operating instructions, safety warnings, and detailed steps for starting the furnace.
Procedures for shutting down the furnace and explanations of safety controls like pressure and limit switches.
General advice for customers and detailed procedures for furnace section maintenance.
Procedures for inspecting and cleaning the evaporator coil, condenser coil, fan, and blower.
Charts for determining correct refrigerant charge based on operating conditions for various models.
A chart for diagnosing and resolving common cooling system issues and symptoms.
Flowcharts to guide diagnosis of furnace operational problems and potential solutions.
Information on how to locate and obtain certified Daikin replacement parts.
Details on warranty, training resources, and aftermarket service contacts.
To Next Page