9
Preparation before Operation
■
Accessories check
Con rm all the accessories are included.
A
B
C
D
A: Pleated lter…1 sheet
< For initial installation >
Inside cushion
B: Operation manual…1 book
(This booklet)
Inside package
C: Remote controller…1 unit
In remote controller
storage slot
D: Pleated lters…4 sheets
< Replacement lters >
In lter container
■
How to attach the pleated
lter
Make sure to attach the pleated lter before starting
operation.
1 Remove the front panel.
• Push the 2 clips (right and left), and pull the front panel
upward and remove it.
Push
Clip
(1 each on right and left)
Front panel
2 Remove UNIT1.
• Holding UNIT1 by the handles, pull UNIT1 upward and
remove it.
Handles
UNIT1
1)
Pull
2)
Up
3 Remove the deodorising catalyst unit.
• Holding the deodorising catalyst unit by the handles, pull
the deodorising catalyst unit upward and remove it.
Handles
Deodorising catalyst unit
1)
Pull
2)
Up
01_EN_3P276413-4F.indd 9 8/1/2012 11:29:32 AM
To Next Page
Loading...
Need help?
General
